Description:

• Blend of citrus and organic solvents with penetrating and emulsifying surfactants.

• Excellent degreaser.

• Will Not produce toxic fumes or unpleasant odors.

• Produces enzymes that digests petroleum based products after rinsing with water.

• Biodegradable

• Non Caustic

• Contains no chlorinated solvents.

• Safe on all surfaces and very economical.

• Provides excellent corrosion protection.

Common Usage:

• Formulated to quickly penetrate tuff grease, oil, and carbon.

• Can be used for degreasing/cleaning of engines, any type of engine parts, heavy equipment, concrete, drilling rigs, general maintenance, electrical utility plants, treating contaminated soils, industrial equipment, and shop floors, just to name a few.

• It can be used on painted or unpainted surfaces, floors, walls, concrete and parts to dissolve soil.

• Works great in soak or re-circulating vats. 

• Excellent for Bio-Remediation of areas contaminated with oil or fuel.  See Below.

• This product has been used by the largest oil companies in the world to clean-up abandoned drilling and producing oil locations.  It has been used to clean-up oil spills in the Gulf of Mexico.

• This product has been approved by various cities to be discharged into the sanitary sewers.

• Very effective in removing glues, tars, tree saps, resins, and other stubborn soils.

• Use concentrated or diluted with water. 

• Safe on most surfaces.

Bio-Remediation:

• Excellent for Bio-Remediation of areas contaminated with oil or fuel.

• Use to clean up soil, water or concrete of spilled oil or fuel.

• For soil clean-up:  Saturate area with Bio-Solv and allow to penetrate.  Penetration time depends on severity of spill.  After penetration, saturate area with water.  This will cause the Bio-Solv to emulsify and turn milky white and will start to consume the spilled oil or fuel.  You will need to turn or till the soil for oxygenation.  This will complete the process.  You may need to repeat this process as needed according to the severity of the spill.  If used as recommended, you should not have to remove or dispose of soil once area is treated.

• For water clean-up:  Add Bio-Solv to contaminated water.  Amount will depend on area contaminated.  Once the Bio-Solv mixes with the water, it will begin to emulsify and turn milky white and will start to consume the spilled oil or fuel. You may need to repeat this process as needed according to the severity of the spill.  If used as recommended, you should not have to remove or dispose of water once area is treated.

• For concrete clean-up:  Saturate area with Bio-Solv and allow to soak for few minutes.  Soaking time depends on severity of spill.  After soaking, spray area with water hose or pressure washer.  This will cause the Bio-Solv to emulsify and turn milky white and will start to consume the spilled oil or fuel.  Agitation may be required if using water hose depending on severity of the spill.  This will complete the process.  You may need to repeat this process as needed according to the severity of the spill.